Asphalt Coated Fiberglass Geogrid 30-200kN Road Overlay Mesh

Asphalt Coated Fiberglass Geogrid - Road Overlay Mesh

What It Is

A fiberglass geogrid is a open-mesh reinforcement woven from continuous glass-fiber filament yarns and coated with asphalt (bitumen), so it bonds directly into hot-mix asphalt layers. This OBOR model (FG26110601) is black, supplied in widths of 1-6 m and roll lengths of 50-100 m, with tensile strengths of 30-200 kN/m. It is certified to CE / ISO9001 / ISO14001 and made in Shandong, China.

What It Does

Laid between asphalt lifts or on the prepared base before overlay, the grid absorbs and redistributes tensile stress at the crack tip: the high-modulus glass yarns carry the load with very low elongation, so reflective cracking from old pavement or joints is delayed, and the asphalt coating melts into the new mix to form a continuous bonded interlayer that also seals surface water. The open apertures let aggregate and mix pass through for full interlock.

Where It Is Used

The applications recorded for this model are driveways, subgrade and pavement reinforcement, road construction, retaining walls and highways: asphalt overlay of cracked concrete or asphalt pavement, airport runways and municipal roads, and bridge-deck surfacing where reflective cracking and rutting must be controlled.

Technical Parameters

Product	Asphalt-coated fiberglass geogrid
Material	Glass fiber filament, asphalt coated
Tensile strength	30 - 200 kN/m
Width	1 - 6 m
Roll length	50 - 100 m
Colour	Black
Model	FG26110601
Certification	CE / ISO9001 / ISO14001
Application	Driveway, subgrade, pavement reinforcement, retaining wall, highway
Packing	20x10x1 cm per unit, 1.0 kg gross weight
Brand / Origin	OBOR / Shandong, China

Product Photos

Fiberglass geogrid laid on the highway before the asphalt overlay is paved.

Wrapped geogrid rolls loaded in a container for shipment.